User guide
Table Of Contents
- System Specifications
- System Utilities
- Machine Disassembly and Replacement
- Disassembly Requirements
- General Information
- External Module Disassembly Process
- Main Unit Disassembly Process
- Main Unit Disassembly Flowchart
- Removing the Switch Cover
- Removing the Keyboard
- Removing the Power Board
- Removing the Launch Board
- Removing the Antenna
- Removing the LCD Module
- Removing the Upper Cover
- Removing the Finger Print Reader
- Removing the Touch Pad Bracket
- Removing the Left Speaker Module
- Removing the Right Speaker Module
- Removing the Bluetooth Module
- Removing the Modem Module
- Removing the Mainboard
- Removing the USB Board
- Removing the RJ-11 Port
- Removing the Thermal Module
- Removing the CPU
- Removing the VGA Module
- LCD Module Disassembly Process
- LCD Module Reassembly Procedure
- Main Module Reassembly Procedure
- Replacing the VGA Module
- Replacing the CPU
- Replacing the Thermal Module
- Replacing the RJ-11 Port
- Replacing the Mainboard
- Replacing the Modem Module
- Replacing the Bluetooth Board
- Replacing the Right Speaker Module
- Replacing the Launch Board
- Replacing the Finger Print Reader
- Replacing the Touch Pad Bracket
- Replacing the Left Speaker Module
- Replacing the Upper Cover
- Replacing the LCD Module
- Replacing the Antenna Cables
- Replacing the Keyboard
- Replacing the Switch Cover
- Replacing the WLAN Module
- Replacing the Hard Disk Drive Module
- Replacing the DIMM Modules
- Replacing the ODD Module
- Replacing the Lower Covers
- Replacing the NewCard and SD Card Trays
- Troubleshooting
- Common Problems
- Power On Issue
- No Display Issue
- Random Loss of BIOS Settings
- LCD Failure
- Built-In Keyboard Failure
- Touchpad Failure
- Internal Speaker Failure
- Internal Microphone Failure
- HDD Not Operating Correctly
- ODD Failure
- USB Failure (Rightside)
- Modem Function Failure
- Wireless/WiMAX Function Failure
- Bluetooth Function Failure
- Robson Module Failure
- EasyTouch Button Failure
- Fingerprint Reader Failure
- Thermal Unit Failure
- HDMI Switch Failure
- External Mouse Failure
- Other Failures
- Intermittent Problems
- Undetermined Problems
- POST Codes Tables
- Common Problems
- Jumper and Connector Locations
- FRU (Field Replaceable Unit) List
- Model Definition and Configuration
- Test Compatible Components
- Online Support Information
- Index
44 Chapter 3
General Information
Pre-disassembly Instructions
Before proceeding with the disassembly procedure, make sure that you do the following:
1. Turn off the power to the system and all peripherals.
2. Unplug the AC adapter and all power and signal cables from the system.
3. Place the system on a flat, stable surface.
4. Remove the battery pack.
Disassembly Process
The disassembly process is divided into the following stages:
• External module disassembly
• Main unit disassembly
• LCD module disassembly
The flowcharts provided in the succeeding disassembly sections illustrate the entire disassembly sequence.
Observe the order of the sequence to avoid damage to any of the hardware components. For example, if you
want to remove the main board, you must first remove the keyboard, then disassemble the inside assembly
frame in that order.
Main Screw List
Screw Quantity Part Number
M2.5*3 (NL) 19 MA000005WG0
M2.5*5 (NL) 9 MA000006WG0
M2.5*9 (NL) 21 MACK25090G0
M2*2.3 (NL) 3 MACF20001G0
M2*3 (NL) 29 MA0000060G0
M2*5 11 MA000004TG0
M3*3 (NL) 8 MCDK03030G0
M2*3 (VGA) 4 MA0000096G0
M2.5*3 (AMD_CPU) 4 AM01O000300
M2.5*3.2 (INTEL) 4 MA000006C00
DIS-THE-SCREW 1 AM043000D00
M2.5*4 5 MA0000005G0