Owner's manual
Table Of Contents
- Aspire 3630 Series
- Disposal instructions
- First things first
- Contents
- Your Acer notebook tour
- Specifications
- Indicators
- Easy-launch buttons
- Touchpad
- Using the keyboard
- Ejecting the optical (CD or DVD) drive tray
- Using a computer security lock
- Audio
- Using the system utilities
- Frequently asked questions
- Arcade (for selected models)
- Taking your notebook PC with you
- Securing your computer
- Expanding through options
- Power management
- Acer eRecovery
- Troubleshooting
- Regulations and safety notices
- ENERGY STAR guidelines compliance
- FCC notice
- Modem notices
- Important safety instructions
- Laser compliance statement
- LCD pixel statement
- Macrovision copyright protection notice
- Radio device regulatory notice
- General
- European Union (EU)
- The FCC RF safety requirement
- Canada - Low-power license-exempt radio communication devices (RSS-210)
- Federal Communications Comission Declaration of Conformity
- Declaration of Conformity for CE Marking
- Index
46
English
Entering passwords
When a password is set, a password prompt appears in the center of the
display screen.
• When the Supervisor Password is set, a prompt appears when you press
<F2> to enter the BIOS utility at boot-up.
• Type the Supervisor Password and press <Enter> to access the BIOS utility.
If you enter the password incorrectly, a warning message appears. Try
again and press <Enter>.
• When the User Password is set and the password on boot parameter is
enabled, a prompt appears at boot-up.
• Type the User Password and press <Enter> to use the computer. If you
enter the password incorrectly, a warning message appears. Try again and
press <Enter>.
Important! You have three chances to enter a password. If you fail
to enter the password correctly after three tries, the system halts.
Press and hold the power button for four seconds to shut down
the computer. Then turn on the computer again, and try again.
Setting passwords
You can set passwords using the BIOS utility.