1N Wireless Router EnGenius Gold 11N Wireless Router V1.
1 1. Introduction ................................................................................................................................................................7 1.1. Package Contents.............................................................................................................................................7 1.3. Introduction .................................................................................................................................................
2 5.6. 6. 5.7. 6.1. Status .............................................................................................................................................................48 6.3. Static IP Address ............................................................................................................................................51 6.4. Dynamic IP Address ................................................................................................................................
3 8.5. 8.6. 9. 8.7. IP Filter ...........................................................................................................................................................77 URL Filter........................................................................................................................................................78 Advanced ..................................................................................................................................................
4 10.9. Reset...........................................................................................................................................................94 Appendix A – FCC Interference Statement ...........................................................................................................................95 Appendix B – Industry Canada statement ...........................................................................................................................
5 Revision History Version 1.
6
7 1. Introduction 1.1. Package Contents • • • • • EnGenius 11N WIRELESS ROUTER AC Adapter RJ-45 Ethernet LAN Cable CD-ROM with User Manual and Setup Utility Quick Guide 1.2.
8 1.3. Introduction ENGENIUS GOLD is a palm size 11N WIRELESS ROUTER. It allows users to create a wireless network and share the Internet among multiple users. The ENGENIUS GOLD can be connected to the Internet through a DSL/Cable modem at any available location. It can even share the connection in your hotel’s room if a RJ-45 network cable is used. ENGENIUS GOLD ensures data transmission security by encrypting data.
9 1.4. LED Overview LED Lights Wireless LAN Internet LAN Power Icon Description Color – Blue Lights when Wireless signal is activated. Blinks when Wireless data transfer. Color – Blue Blinks when WPS handshake is initialized. Color – Blue Lights when wired network device is connected to RJ-45 port. Blinks when data transfer occurs on RJ-45 port. Color – Blue Lights when device is powered ON. Blinks device is Reset.
10 1.5. Before you Begin This section will guide you through the installation process. Placement of the ENGENIUS GOLD is very important to avoid poor signal reception and performance. Avoid placing the device in enclosed spaces such as a closet, cabinet or wardrobe. 1.6. Considerations for Wireless Installation The operating distance of all wireless devices cannot be pre-determined due to a number of unknown obstacles in the environment that the device is deployed.
11 2. Configure PC/Laptop Network Interface 2.1. Windows XP/Vista Click Start button and open Control Panel.
12 Windows XP, click [Network Connection] Windows Vista, click [View Network Status and Tasks] then [Manage Network Connections] Right click on [Local Area Connection] and select [Properties].
13 Check “Client for Microsoft Networks”, “File and Printer Sharing”, and Internet Protocol (TCP/IP) is ticked. If not, please install them.
14 2.2. Windows 7 In the Start menu search box, type: ncpa.cpl The Network Connections List appears. Right-click the Local Area Connection icon and click Properties.
15 In the Networking tab of the Local Area Connection Properties dialog box, click either Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol Version 6 (TCP/IPv6), and then click Properties.
16 2.3. Apple MacOS Go to System Preferences > Network Under Network setting, select Using DHCP. Click Apply when done.
17 3.
18
19
20 4. Manually enter Setup Wizard 1. Open a web browser (Internet Explorer/Firefox/Safari) and enter the IP Address http://192.168.0.1 Note: If you have changed the default LAN IP Address of the WIRELESS ROUTER, ensure you enter the correct IP Address. 2. The default username and password are admin. Once you have entered the correct username and password, click the OK button to open the web-base configuration page.
21 3. You will see the following webpage if login successful.
22 4. Click Wizard to enter the Setup Wizard. Then click Next to begin the wizard.
23 5. Select the Operation Mode. Please ensure you have the proper cables connected as described in the Hardware Installation section.
24 AP Router Mode a) The device will now automatically search for the correct Internet settings. b) The most appropriate WAN type will be determined and selected automatically. If it is incorrect, please select Others to set up the WAN settings manually.
25 c) There are many WAN service types available. Please obtain the correct settings from your Internet Service Provider (ISP). Static IP Address If your ISP Provider has assigned you a fixed IP address, enter the assigned IP address, Subnet mask, Default Gateway IP address, and Primary DNS and Secondary DNS (if available) of your ISP provider.
26 Dynamic IP Address The IP Address is allocated automatically. However some ISP’s will also recognize the MAC address and will reject connections if the MAC address does not match. If your ISP has recorded the MAC address of your computer’s Ethernet LAN card, please connect only the computer with the authorized MAC address, and click the Clone MAC Address button. This will replace the AP Router MAC address to the computer MAC address.
27 PPP over Ethernet ISP requires an account username and password. PPP over Ethernet Username: Username assigned to you by the ISP Service: You can assign a name for this service. (Optional) Password: MTU: Password for this username. The maximum size of packets. Do not change unless mentioned by the ISP.
28 Point-to-Point Tunneling Protocol (PPTP) PPTP is used by some ISPs.
29 PPTP WAN Interface Settings WAN Interface Type: Select whether the ISP is set to Static IP or Dynamic IP addresses. MAC: The MAC Address that is used to connect to the ISP. Hostname: PPTP Settings This is optional. Only required if specified by ISP Login: Username assigned to you by the ISP Service IP Address: The IP Address of the PPTP server. Password: Connection ID: MTU: Password for this username. This is optional. Only required if specified by ISP The maximum size of packets.
30 d) Setup the level of wireless security to be used. EnGenius recommends the Highest level of security to be used. Note: 802.11n wireless speeds may not be achievable if the security is setup to Lowest and Low level. SSID: Key: Enter the name of your wireless network. Enter the security key for your wireless network.
31 e) Check the settings are correct, and then click Reboot to apply the settings.
32 5. System 5.1. Status This page allows you to monitor the status of the device. Status Model: Description of this device. Uptime: The duration about the device has been operating without powering down or reboot. Mode: Current Date/Time: Hardware version and Serial Number: Kernel and Application version: The device is currently in which mode. The device’s system time. If this is incorrect, please set the time in the Tools / Time page. Hardware information for this device.
33 WAN Settings Attain IP Protocol: Method used to connect to the Internet Subnet Mask The WAN Subnet Mask of the device. IP address: MAC address Primary and Secondary DNS: The WAN IP Address of the device. The MAC address of the device’s WAN Interface. Primary and Secondary DNS servers assigned to the WAN connection.
34 LAN Settings IP address: The LAN IP Address of the device. DHCP Server Whether the DHCP server is Enabled or Disabled. Subnet Mask The LAN Subnet Mask of the device.
35 WLAN Settings Channel: The wireless channel in use. Security: Wireless encryption is enabled for this SSID. ESSID: BSSID: Associated Clients: The SSID (Network Name) of the wireless network. (up to 4 SSID’s are supported) The MAC address of this SSID. The number of wireless clients connected to this SSID.
36 5.2. LAN This page allows you to modify the device’s LAN settings.
37 LAN IP IP address: The LAN IP Address of this device. 802.1d Spanning Tree: When Enabled, the Spanning Tree protocol will prevent network loops in your LAN network. IP Subnet Mask: The LAN Subnet Mask of this device.
38 DHCP Server DHCP Server: Lease Time: Start / End IP: Domain name: The DHCP Server automatically allocates IP addresses to your LAN devices. The duration of the DHCP server allocates each IP address to a LAN device. The range of IP addresses of the DHCP server will allocate to LAN devices. The domain name for this LAN network.
39 Two DNS servers can be assigned for use by your LAN devices. There are four modes available. DNS Servers From ISP: The DNS server IP address is assigned from your ISP. DNS Relay: LAN clients are assigned the device’s IP address as the DNS server. DNS requests are relayed to the ISP’s DNS server. User-Defined: The DNS server IP address is assigned manually.
40 5.3. DHCP This page shows the status of the DHCP server and also allows you to control how the IP addresses are allocated.
41 The DHCP Client Table shows the LAN clients that have been allocated an IP address from the DHCP Server . DHCP Client Table IP address: The LAN IP address of the client. Expiration Time: The time that the allocated IP address will expire. MAC address: Refresh: The MAC address of the client’s LAN interface. Click this button to update the DHCP Client Table.
42 You can also manually specify the IP address that will be allocated to a LAN client by associating the IP address with its MAC address. Type the IP address you would like to manually assign to a specific MAC address and click Add to add the condition to the Static DHCP Table.
43 5.4. Schedule This page allows you to schedule times that the Firewall and Power Saving features will be activated / deactivated. Click Add to create a Schedule entry.
44 Schedule Schedule Description: Assign a name to the schedule. Days: Define the Days to activate or deactivate the schedule. Service: Time of day: The service provides for the schedule. Define the Time of day to activate or deactivated the schedule. Please use 24-hour clock format.
45 5.5. Log This page displays the system log of the device. When powered down or rebooted, the log will be cleared. Log Save: Save the log to a file. Refresh: Updates the log. Clear: Clears the log.
46 5.6. Monitor This page shows a histogram of the WAN and Wireless LAN traffic. The information is automatically updated every five seconds.
47 5.7. Language This page allows you to change the Language of the User Interface.
48 6. Internet The Internet section allows you to manually set the WAN type connection and its related settings. 6.1. Status This page shows the current status of the device’s WAN connection.
49 6.2. Dynamic IP Address The IP Address is allocated automatically. However some ISP’s will also recognize the MAC address and will reject connections if the MAC address does not match. If your ISP has recorded the MAC address of your computer’s Ethernet LAN card, please connect only the computer with the authorized MAC address, and click the Clone MAC Address button. This will replace the AP Router MAC address to the computer MAC address.
50 Dynamic IP Address Hostname: MAC address: DNS Servers This is optional. Only required if specified by ISP The MAC Address that is used to connect to the ISP. Two DNS servers can be assigned for use by your LAN devices. There are two modes available. From ISP: User-Defined: LAN devices are assigned the DNS server IP address of your ISP. Set the DNS server IP address manually.
51 6.3. Static IP Address If your ISP Provider has assigned you a fixed IP address, enter the assigned IP address, Subnet mask, Default Gateway IP address, and Primary DNS and Secondary DNS (if available) of your ISP provider. Static IP Address IP address: Assign an IP address Manually. Default Gateway: Specify the gateway of your network. IP Subnet Mask: User-Defined: Primary DNS Secondary DNS Specify an IP address’s subnet mask. Set the DNS server IP address manually.
52 6.4. PPP over Ethernet ISP requires an account username and password.
53 PPP over Ethernet (PPPoE) Username: Username assigned to you by the ISP Service: You can assign a name for this service. (Optional) Password: MTU: Authentication type Type: Password for this username. The maximum size of packets. Do not change unless mentioned by the ISP. Select whether the ISP uses PAP or CHAP methods for authentication. Select Auto if unsure. You can choose the method that the router maintains connection with the ISP.
54 7. Wireless The Wireless section allows you to configure the Wireless settings. 7.1. Status This page shows the current status of the device’s Wireless settings.
55 Basic Radio: Enable or Disable the device’s wireless signal. Band: Select the types of wireless clients that the device will accept. Mode: Enable SSID#: SSID# Auto Channel: Channel: Select between Access Point or Wireless Distribution System (WDS) modes. eg: 2.4 GHz (B+G+N) Only 802.11b and 11g clients will be allowed. Select the number of SSID’s (Wireless Network names) you would like. You can create up to 4 separate wireless networks. Enter the name of your wireless network.
56 Wireless Distribution System (WDS) Using WDS to connect Access Point wirelessly, and in doing so extend a wired infrastructure to locations where cabling is not possible or inefficient to implement. Note that compatibility between different brands and models is not guaranteed. It is recommended that the WDS network be created using the same models for maximum compatibility. Also note that all Access Points in the WDS network needs to use the same Channel and Security settings.
57 7.2. Advanced This page allows you to configure wireless advance settings. It is recommended the default settings are used unless the user has experience with these functions.
58 Advanced Fragment Threshold: RTS Threshold: Beacon Interval: DTIM Period: N Data Rate: Channel Bandwidth: Preamble Type: CTS Protection: Tx Power: Specifies the size of the packet per fragment. This function can reduce the chance of packet collision. However when this value is set too low, there will be increased overheads resulting in poor performance.
59 7.3. Security This page allows you to set the wireless security settings. Security SSID Selection: Select the SSID that the security settings will apply to. WMM: Wi-Fi Multi-Media is a Quality of Service protocol which prioritizes traffic in the order according to voice, video, best effort, and background. Broadcast SSID: If Disabled, then the device will not be broadcasting the SSID. Therefore it will be invisible to wireless clients.
60 Encryption: Note that in certain situations, WMM needs to be enabled to achieve 11n transfer speeds. The encryption method to be applied. You can choose from WEP, WPA pre-shared key or WPA RADIUS. • Disabled - no data encryption is used. • WEP - data is encrypted using the WEP standard. • WPA-PSK - data is encrypted using the WPA-PSK standard. This is a later standard than WEP, and provides much better security than WEP.
61 802.1x Authentication RADIUS Server IP Address: The IP Address of the RADIUS Server RADIUS Server password: The RADIUS Server’s password. RADIUS Server port: The port number of the RADIUS Server.
62 WEP Encryption: WEP Encryption Authentication Type: Please ensure that your wireless clients use the same authentication type. Key Length: Select the desired option, and ensure the wireless clients use the same setting. Key type ASCII: regular text (recommended) HEX: for advanced users • • Default Key: 64 Bit - data is encrypted, using the default key, before being transmitted. You must enter at least the default key. For 64 Bit Encryption, the key size is 10 chars in HEX (0~9 and A~F).
63 Encryption Key #: Enter the key value or values you wish to use. Only the Key selected as Default is required. The others are optional. WPA Pre-Shared Key Encryption: WPA Pre-Shared Key Encryption Authentication Type: Please ensure that your wireless clients use the same authentication WPA type: Select the WPA encryption you would like. Please ensure that your wireless clients use the same settings. Pre-shared Key Type: Pre-shared Key: type.
64 WPA RADIUS Encryption: WPA RADIUS Encryption WPA type: RADIUS Server IP address: Select the WPA encryption you would like. Please ensure that your wireless clients use the same settings. Enter the IP address of the RADIUS Server RADIUS Server Port: Enter the port number used for connections to the RADIUS server. RADIUS Server Enter the password required to connect to the RADIUS server.
65 7.4. Filter This page allows you to create filters to control which wireless clients can connect to this device by only allowing the MAC addresses entered into the Filtering Table.
66 Wireless Filter Enable Wireless Access Control: Description: Tick the box to Enable Wireless Access Control. When Enabled, only wireless clients on the Filtering Table will be allowed. Enter a name or description for this entry. MAC address: Enter the MAC address of the wireless client that you wish to allow Add: Click this button to add the entry. Reset: Click this button if you have made a mistake and want to reset the connection. MAC address and Description fields.
67 7.5. Wi-Fi Protected Setup (WPS) WPS feature is following the Wi-Fi Alliance WPS standard and it eases the set up of security-enabled Wi-Fi networks in the home and small office environment. It reduces the user steps required to configure a network and supports two methods that are familiar to most consumers to configure a network and enable security.
68 Wi-Fi Protected Setup (WPS) WPS: Tick to Enable the WPS feature. WPS Button: Tick to Enable the WPS push button. Wi-Fi Protected Setup Information WPS Current Status: Shows whether the WPS function is Configured or Un-configured. Configured means that WPS has been used to authorize connection between the device and wireless clients. SSID: The SSID (wireless network name) used when connecting using WPS. Authentication Shows the encryption method used by the WPS process.
69 1. Pin Code Method Note the Pin code of your WIRELESS ROUTER device. Please use this Pin code to initialize the WPS process from the wireless client configuration utility. This process will be different for each brand or model. Please consult the user manual of the wireless client for more information.
70 7.6. Client List This page shows the wireless clients that are connected to the WIRELESS ROUTER device.
71 7.7. Policy This page allows you to configure the access policies for each SSID (wireless network). Policy WAN Connection: Communication between Wireless clients: Communication between Wireless clients and Wired clients. Allow wireless clients on this SSID to access the WAN port which typically is an Internet connection. Whether each wireless client can communicate with each other in this SSID. When Disabled, the wireless clients will be isolated from each other.
72 8. Firewall The Internet section allows you to set the access control and Firewall settings. 8.1. Enable This page allows you to Enable / Disable the Firewall features. When Enabled, Denial of Service (DoS) and SPI (Stateful Packet Inspection) features are also be enabled.
73 8.2. Advanced You can choose whether to allow VPN (Virtual Private Network) packets to pass through the Firewall.
74 8.3. DMZ If enabled this feature, allows the DMZ computer on your LAN to be exposed to all users on the Internet. • • • This allows almost any application to be used on the server. The “DMZ PC” will receive all Unknown connections and data. If the DMZ feature is enabled, please enter the IP address of the PC to be used as the “DMZ PC” Note: The “DMZ PC” is effectively outside the Firewall, making it more vulnerable to attacks. For this reason, you should only enable the DMZ feature when required.
75 8.4. Denial of Service (DoS) Denial of Service (Denial of Service) is a type of Internet attack that sends a high amount of data to you with the intent to overload your Internet connection. Enable the DoS firewall feature to automatically detect and block these DoS attacks.
76 8.5. MAC Filter You can choose whether to Deny or only Allow those computers listed in the MAC Filtering table to access the Internet. MAC Filter Enable MAC filtering: Tick this box to Enable the MAC filtering feature.
77 8.6. IP Filter You can choose whether to Deny or only Allow, computer with those IP Addresses from accessing certain Ports. This can be used to control which Internet applications the computers can access. You may need to have certain knowledge of what Internet ports the applications use. IP Filter Enable IP filtering: Tick this box to Enable the IP filtering feature.
78 8.7. URL Filter You can deny access to certain websites by blocking keywords in the URL web address. For example, “abc123” has been added to the URL Blocking Table. Any web address that includes “abc123” will be blocked.
79 9. Advanced The Internet section allows you to configure the Advanced settings of the router. 9.1. Network Address Translation (NAT) This page allows you to Enable / Disable the Network Address Translation (NAT) feature. The NAT is required to share one Internet account with multiple LAN users. It also is required for certain Firewall features to work properly.
80 9.2. Port Mapping Port Mapping allows you to redirect a particular range of ports to a computer on your LAN network. This helps you host servers behind the NAT and Firewall. In the example below, there is a Mail Server that requires ports 22 to 23. When there is a connection from the Internet on those ports, it will be redirected to the Mail Server at IP address 192.168.0.150. Port Mapping Enable Port Mapping Tick this box to Enable the Port Mapping feature.
81 9.3. Port Forwarding Port Forwarding allows you to redirect a particular public port to a computer on your LAN network. This helps you host servers behind the NAT and Firewall. In the example below, there is a FTP Server running on port 21 on the LAN. For security reasons, the Administrator would like to provide this server to Internet connection on port 30. Therefore then there is a connection from the Internet on port 30, it will be forwarded to the computer with the IP address 192.168.0.
82 9.4. Port Trigger If you use Internet applications which use non-standard connections or port numbers, you may find that they do not function correctly because they are blocked by the Wireless Router's firewall. Port Trigger will be required for these applications to work. Port Trigger Enable Port Tick this box to Enable the Port Trigger feature. Popular applications: This is a list of some common applications with preset settings.
83 9.5. Application Layer Gateway (ALG) Certain applications may require the use of ALG feature to function correctly. If you use any of the applications listed, please tick and select it to enable this feature.
84 9.6. Universal Plug and Play (UPnP) The UPnP function allows automatic discovery and configuration of UPnP enabled devices on your network. It also provides automatic port forwarding for supported applications to seamlessly bypass the Firewall. Universal Plug and Play (UPnP) Enable the UPnP Feature: Tick this box to Enable the UPnP feature to allow supported devices to be visible on the network.
85 9.7. Routing If your WIRELESS ROUTER device is connected a network with different subnets, then this feature will allow the different subnets to communicate with each other. Note: NAT function needs to be disabled for the Routing feature to be enabled. Static Routing Enable Static Routing: Tick this box to Enable the Static Router feature. Destination LAN IP: Enter the IP address of the destination LAN.
86 Destination Subnet Mask Gateway Hop Interface 192.168.1.0 255.255.255.0 192.168.123.216 1 LAN 192.168.0.0 255.255.255.0 192.168.123.103 1 LAN So if, for example, Client3 wants to send an IP data packet to 192.168.0.2 (Client 2), it would use the above table to determine that it had to go via 192.168.123.103 (Router 2) And if it sends Packets to 192.168.1.11 (Client 1) will go via 192.168.123.216 (Router 1).
87 10. Tools This section allows you to configure some device system settings. 10.1. Admin This page allows you to change the system password and to configure remote management. Change Password Old Password: Enter the current password. New Password: Enter your new password. Repeat New Password: Enter your new password again for verification. Remote Management Host Address: You can only perform remote management from the specified IP address.
88 10.2. Time This page allows you to set the system time. Time Time Setup: Select the method you want to set the time. Time Zone: Select the time zone for your current location. NTP Time Server: Enter the address of the Network Time Protocol (NTP) Server to Daylight Savings: Check whether daylight savings applies to your area. automatically synchronize with a server on the Internet.
89 10.3. Dynamic DNS (DDNS) This free service is very useful when combined with the Virtual Server feature. It allows Internet users to connect to your Virtual Servers using a URL, rather than an IP Address. This also solves the problem of having a dynamic IP address. With a dynamic IP address, your IP address may change whenever you connect, which makes it difficult to connect to you. 10.4. DDNS Services work as follows: 1.
90 10.5. Power This page allows you to Enable or Disable the wireless LAN power saving features.
91 10.6. Diagnosis This page allows you determine if the WIRELESS ROUTER device has an active Internet connection. Diagnosis Address to Ping: Enter the IP address you like to see if a successful connection can be Ping Result: The results of the Ping test. made.
92 10.7. Firmware The firmware (software) in the WIRELESS ROUTER device can be upgraded using your Web Browser. To perform the Firmware Upgrade: 1. Click the Browse button and navigate to the location of the upgrade file. 2. Select the upgrade file. Its name will appear in the Upgrade File field. 3. Click the Apply button to commence the firmware upgrade. Note: The Wireless Router is unavailable during the upgrade process, and must restart when the upgrade is completed.
93 10.8. Back-up Back-up Restore to factory Restores the device to factory default settings. Backup Settings: Save the current configuration settings to a file. Restore Settings: Restores a previously saved configuration file. default: Click Browse to select the file. Then Upload to load the settings.
94 10.9. Reset In some circumstances it may be required to force the device to reboot.
95 Appendix A – FCC Interference Statement Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
96 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
97 Appendix B – Industry Canada statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. French translation: Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
98 The band from 5600-5650MHz will be disabled by the proprietary software during the manufacturing and which cannot be changed by the end-user. French translation: NOTE IMPORTANTE: (Pour l'utilisation de dispositifs mobiles) Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé.
99 (The user manual of transmitter devices equipped with detachable antennas shall contain the following information in a conspicuous location: ) This device has been designed to operate with an antenna having a maximum gain of [x] dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
100 lapuissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire àl'établissement d'une communication satisfaisante. IMPORTANT NOTE: (For Portable device use) Radiation Exposure Statement: The product comply with the US/Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual.
101 This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna, 3) For all products market in Canada, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool.
102 IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization.
103 Plaque signalétique du produit final Ce module émetteur est autorisé uniquement pour une utilisation dans un dispositif où l'antenne peut être installée de telle sorte qu'une distance de 20cm peut être maintenue entre l'antenne et les utilisateurs. Le produit final doit être étiqueté dans un endroit visible avec l'inscription suivante: "Contient des IC: 3616C-SR1221N".
