User guide

Low Battery Indication on the Digital Pad

When the batteries remain too low power and are in need of

replacement, the Low Battery icon will appear on the display. Please

replace the batteries in the pad.

When the batteries are exhausted, the pad sounds 3 beeps. Then the pad is

turned off immediately.

Notes on Replacement of Batteries in the Pad

When you replace the batteries in the pad, if the batteries are not in the battery

compartment over about one minute, the adjusted date and time will be erased.

Please reset the date and time.

Notes on use of the SD Memory Card

z Before you remove the SD memory card from the pad, please turn off the

pad first. Or some data in the last digital page file may be lost.

z When a SD memory card with the write-protect switch set to LOCK is

inserted into insertion slot, the pad sounds 2 beeps and the Storage

Device icon

flashes on the display. If you use the digital inking pen to

write on the pad, the pad will beep. You can not use the digital pad under

this situation. Please remove the SD memory card with the write-protect

switch set to LOCK.

Full Memory Indication

The 90% icon will appear to indicate that 90% capacity of the

current storage device (

or ) is used.

The Full icon will be shown if the memory is full in the current

storage device (

or ). If that is the case, the digital pad can

not store your new handwriting. Also, if you still keep writing, the pad sounds 2

beeps.

Note! Under such circumstances, you need to erase unwanted digital pages if

you want to continue to write.

Note! In the following chapter, you will find that it is very easy to import, copy,

move and delete the digital pages when connecting the pad to your PC

through USB cable.