User guide

2
4. Follow the instructions on your phone to complete the
installation of the DigiMemo Express software.
Tip! You can also refer to the user guide of your phone
for other ways to transfer an installation file (for example,
to download it, or receive it in an MMS or as an e-Mail
attachment) and install the software to your phone.
Turning on and Working modes of the
Digital Pad
Writing Mode and DHW file
When turning on the digital pad without the
Transmitter connected, the working mode of the
digital pad will be in Writing mode. The display
will be on and show the Digital Page Number,
Storage Device icon and Time display.
In the Writing mode, everything you write on
the digital pad will be immediately captured and
stored in the current Digital Page file which is the DHW
file.
Tip! You can refer to the user guide of your DigiMemo
for more information.
Bluetooth Mode
In Bluetooth mode, the digital pad can be connected to
your phone through Bluetooth connectivity.
To turn on the digital pad into Bluetooth mode
1. Connect the Transmitter to the digital pad by the mini
USB connector.
2. Press and hold the Power button on the
digital pad until the display is on. The working
mode of the digital pad is now in Bluetooth
mode.
The display will show the Bluetooth icon and
the indicator light on the Transmitter remains
solidly lit.
Tip! When in the Writing mode, connecting the
Transmitter to the digital pad will automatically change the
working mode to Bluetooth mode.
Note! In the Bluetooth mode, your handwriting on the
digital pad will not be captured and stored.
Turning off the Digital Pad
Press and hold the Power button until the display is blank.
Tip! When in the Bluetooth mode, disconnecting the
Transmitter from the digital pad will turn off the digital pad.
Automatic Shutting down in Bluetooth mode
If your phone has not accessed any data from the digital
pad within the previous 15 minutes, the digital pad will
sound a beep and automatically shut down.