User Guide

Once the oven has been installed:

a) set the thermostat knob to MAX;

b) switch the oven function control knob to

conventional cooking ( );

c) allow the oven to run empty for approximately

45 minutes;

d) open a window for ventilation.

During this time, an unpleasant odour may be emitted.

This is absolutely normal, and is caused by residues of

manufacturing.

Once this operation is carried out, let the oven cool

down, then clean the oven cavity with a soft cloth soaked

in warm soapy water.

Before cooking for the first time, carefully wash the

shelf and the dripping pan.

To open the oven door, always catch the

handle in its central part (Fig. 4).

Fig. 4

Fig. 3

Minute minder (Fig. 3)

The minute minder will mark the end of a timed period with

an acoustic alarm. The maximum timing is 60 minutes.

Turn the Minute minder knob clockwise to the maximum

time position, then turn it back to the required time.

When cooking time is over, an acoustic alarm will

sound. The minute minder will not affect in any way the

oven operation.

FO 2456

All cookings must be carried out

with the oven door closed

The Safety Thermostat

This oven is provided with a safety thermostat. In case of

malfunctioning of the main thermostat, and consequent

over-heating, the safety device will stop the power

supply to the appliance. If this happens, call your local

Service Centre. Under no circumstances should you

attempt to repair the appliance yourself.

Cooling fan

The purpose of the fan is to cool the control panel,

the knobs and the oven door handle. The air stream

flows out between the control panel and the oven

door handle.

To ensure proper cooling, the fan will continue to ope-

rate even after the oven is turned off, until normal

temperature levels have been reached.

When the oven is first

installed