Product Manual

2.Connect unit to a source of clean water 5. WEAR BUMP HAT AND HOOD AT ALL
30-90 PSI (optional). TIMES WHILE OPERATING.
6. WEAR GLOVES AT ALL TIMES WHILE
OPERATING.
7. WARNING: ALWAYS POINT NOZZLE
AWAY FROM SELF AND OTHERS. Press
the hand operated LEVER to start the
flow of air. *
Verify that the System is Operational
Once the system is fully assembled,
check to make sure it is operational and
ready to use:
1. Make sure that the pressure vessel
vent valve is closed.
8. Release LEVER to make sure air flow
stops. *
The Unit is now operational.
*If airflow is incorrect or does not stop see
Trouble Shooting Section.
4.0 Operating Procedures
4.1 Safe Use Instructions
Before operating the Model 2-PS, read and
2. Place the Air Safety Lockout Valve
understand the Operator's Booklet and the
open. (next to regulator) Up position.
Material Safety Data Sheet for the Soda
Blast Media used in this unit. If an operator
cannot read or is a poor reader, a qualified
person must explain equipment manuals
and all warning labels, making sure that the
operator knows how to safely use and
maintain the equipment.
INCOMPLETE UNDERSTANDING OR
IMPROPER TRAINING CAN LEAD TO
SERIOUS INJURY. IN ADDITION:
NEVER POINT THE NOZZLE AT ANY
PERSON, ANIMAL, OR OBJECT
OTHER THAN THE INTENDED OB-
3. CHECK FOR ANY AIRLEAKS OR
JECT TO BE CLEANED!!!!
OPEN VALVES. TURN OFF AIR AND
SERIOUS INJURY COULD RE-
CORRECT BEFORE CONTINUING.
SULT!!!!
4. Make sure that the pressure regulator
is set to 90 PSI.
8