User manual

Front View — Receiving Unit [EX-G019-RX]
HDMI OUT
IR
E
X
TENDER
EQ
HDMI OUT: Connect to a HDMI display with a HDMI M-M cable here.
EQ: Adjust the 8-level equalization control to the received HDMI signals. 0 – 7 = strongest – weakest.
It is recommended to switch from 7 to 0 to find the optimal visual experience.
IR EXTENDER: Extendable infrared reception socket for plugging in the extension cable of IR
receiver.
Push button: Select CEC or IR transmission (Must be consistent with TX unit).
Lateral View — Receiving Unit [EX-G019-RX]
DDC
TMDS
TMDS: Plug in a CAT-5/5e/6 cable that needs to be linked to the TMDS connector of the transmitting
unit EX-G019-TX.
DDC: Plug in a CAT-5/5e/6 cable that needs to be linked to the DDC connector of the transmitting
unit EX-G019-TX.
ACE PLUS CORP.
Headquarters :
9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian,
Taipei, Taiwan 231
TEL: [phone]
FAX: [phone]
Website: www.ace-plus.com
Page 6 of 10