ACE PLUS CORP. EX-G007 HDMI over Single CAT5 Extender User Manual Page 1 of 8 Headquarters : 9F-2., No. 190 Sec. 2 Jung Shing Rd.,Hsin-dian, Taipei, Taiwan 231 TEL: +886-2-2912-4201 FAX: +886-2-2912-3164 Website: www.ace-plus.
ACE PLUS CORP. Safety and Notice The EX-G007 HDMI over Single CAT5 Extender has been tested for conformity to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the EX-G007 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit. z Follow all instructions and warnings marked on this unit.
ACE PLUS CORP. EXG007TX EXG076B EXG076A EXG007RX Features z State-of-the-art Silicon Image (founder of HDMI) chipset embedded for upmost compatibility and reliability z HDMI 1.
ACE PLUS CORP. Specifications & Package Contents Model Name EX-G006 EX-G009 EX-G007 EX-G007-RX Technical EX-G006-TX EX-G006-RX EX-G009-TX EX-G009-RX EX-G007-TX aka Role of usage Transmitter [TX] EX-G076A Receiver [RX] Transmitter [TX] HDMI compliance HDCP compliance HDMI 1.3c Video bandwidth Single-link 340MHz [10.
ACE PLUS CORP. Panel Descriptions Front View — Transmitting Unit Mode EX-G007-TX HDMI-IN HDMI-IN: Connect to a HDMI source with a HDMI M-M cable here Mode: 0 = HDMI mode with surround sound audio output 1 = HDMI mode with stereo audio output 2 = DVI mode 3~5 = Reserved 6 = Use default EDID* 7 = Learn EDID from the display Note for EDID (Extended Display Identification Data) learning 1.
ACE PLUS CORP. Front View — Receiving Unit EQ EX-G007-RX HDMI-OUT HDMI-OUT: Connect to a HDMI display with a HDMI M-M cable here. EQ: Adjust the 8-level equalization control knob to the received HDMI signals. 0 – 7 = strongest – weakest. It is recommended to switch from 7 to 0 to find the optimal visual experience. Rear View — Receiving Unit EX-G007-RX +5V DC RJ45-IN RJ45-IN: Plug in a CAT-5/5e/6 cable that needs to be linked to the RJ-45 connector of the transmitting unit EX-G007-TX.
ACE PLUS CORP. EDID Learning 1. Turn on EX-G007-TX. 2. Turn the Mode of EX-G007-TX counterclockwise from 0 (for surround sound) or 1 (for stereo) to 7. 3. Use a HDMI cable to connect EX-G007-TX & the display (better not connect to video source). The LED on the RJ-45 of EX-G007-TX will dim and light again, which indicates the EDID learning process is finished. 4. Turn the Mode of EX-G007-TX clockwise from 7 to 0 (for surround sound) or 1 (for stereo).
ACE PLUS CORP.
