User Guide

Chapter 8: Printing
229
Use gamma
correction
Applies gamma correction to the printed images. Type a number from
0.10 to 3.00 in the Gamma value field to adjust the gamma of the
image. Higher values make the image appear brighter, while lower values
make the image appear darker.
Use EXIF 2.2
printing when
available
Your camera may capture EXIF information that, when shared with your
printer, will optimize printing results. Select this option if your camera and
printer support EXIF 2.2 printing.
Setting image size and positioning
You can use the Page Settings options in the Print dialog box to adjust and control the size of
the images you are printing, and the positioning of images on each page.
Page Settings options
Page position Specifies where to place the image on each page.
Margins Specifies the size of the margins. Type a value or click the arrows in the
Top, Bottom, Left, and Right spin boxes.
Number of
prints per
image
Specifies how many copies of each image to print. The print utility adds
pages as required.
Automatically
rotate picture
based on print
format
Specifies whether you want the print utility to determine automatically
which orientation to use for each image. If you select the check box, the
print utility changes each page's orientation to best suit the image you are
printing.
Maintain
aspect ratio
Specifies whether you want the print utility to maintain the original
image's aspect ratio. Select one of the following options to indicate how
the print utility should handle the aspect ratio for oversized images:
x Crop image to fit print format: prints only the part of the image
that fits within the print format.
x Shrink image to fit print format: prints the entire image, reduced
to fit inside the print format.