User Guide

ACDSee Pro 2.5 - User Guide
168
Angle Specifies the angle of the waves. Type a number from 1 to 360 or drag the
arrow to adjust the angle.
Background
color
Specifies the background color. Select the Image check box to use the
original image colors, or click the color picker to select a different color.
Applying a Weave effect
You can use the Weave effect to give a photo the appearance of being woven into a tapestry or
basket. You can control the width of the vertical and horizontal strips, the width of the gap
between the strips, and the background color that displays through the gap. You can save your
options as a preset for use at another time.
To apply a Weave effect:
1. On the Edit Panel, click Effects, and then double-click Weave.
2. On the Weave tab, set the options as described below.
3. Do one of the following:
x Click Done to accept your changes and close the tab.
x Click Cancel to discard your changes and close the tab.
Weave options
Strip width Specifies the width of the vertical and horizontal strips.
Gap width Specifies the width of the gap between the strips.
Background
color
Specifies the color of the background. Click the color picker to select a
different color.
Applying a Wind effect
You can use the Wind effect to add wind lines that make stationary objects in your image look
like they are moving. You can select or change the Wind options to add wind to your image,
and save your options as a preset for future use.
To apply a Wind effect:
1. On the Edit Panel, click Effects, and then double-click Wind.
2. On the Wind tab, select or change the options as described below.
3. Do one of the following:
x Click Done to apply your changes and close the Wind tab.
x Click Cancel to discard your changes and close the tab.