User Guide

ACDSee Pro 2.5 - User Guide
128
Batch Processor Vignette options
You can use the options in the Vignette section to add a frame around a subject, such as a
person or a bouquet of flowers. You can change the focal point in the portrait. You can also
control the appearance of the border.
Vignette options
Horizontal Specifies the focal point of the portrait on the horizontal axis. A value of 500
places the center in the middle of the photo.
Vertical Specifies the focal point of the portrait on the vertical axis. A value of 500
places the center in the middle of the photo.
Clear zone Specifies the size of the clear area around the focal point in the portrait.
Drag the slider to the left to reduce the size of the clear area. Drag the
slider to the right to increase the size of the clear area.
Transition
zone
Specifies the width of the transition area between the clear zone and the
frame. Drag the slider to the left to narrow the transition area. Drag the
slider to the right to widen the transition area.
Shape Specifies the shape of the frame:
x Round: Select Round if you want the frame to be round.
x Rectangular: Select Rectangular if you want the frame to be square.
Show outline Select Show outline if you want to display an outline that shows the
outside edge of the clear zone and the inside edge of the frame.