User Guide

ACDSee™ Pro User Guide
30
Detector prompts you, select the Acquire images from the device with ACDSee radio
button.
• In the Browser, click File | Acquire, and select the name of your device.
3 Follow the instructions in the wizard. You will be prompted with different dialog boxes
depending on the settings you selected in the initial configuration.
Updating or deleting a device profile
You can adjust the settings of a profiled device, or delete the profile from ACDSee.
To update or delete a profile:
1 In the Browser, click File | Get Photos, and select Edit Photo Transfer Settings.
2 In the Edit Photo Transfer Settings dialog box, select a device from the list.
3 Do one of the following:
• To adjust the profiled settings, click Edit. In the Edit Device Profile dialog box, change the
options, and then click OK.
• To rename the profile, click Rename. Type a new name for the profile, and then click OK.
• To delete the profile, click Delete.
4Click Close to accept your changes and return to ACDSee.
Getting photos from a digital camera
ACDSee's Get Photos Wizard guides you through the process of downloading files from your camera.
You can preview the images you want to download, and specify a location for them on your hard
drive.
To use the Get Photos Wizard, your camera needs to do one of the following:
• Connect as a mass storage device.
• Use a digital camera plug-in.
If your camera connects to the computer as a removable drive, you can download photos directly
from the File List and Folders pane as ACDSee detects and displays the drive letter in the folder list.
To download photos from a camera using the Get Photos Wizard:
1 Connect your camera to your computer. Make sure your camera is turned on, and the cable is
properly connected to your computer.
2Click File | Get Photos, and then click From Camera or Card Reader.
3On the Welcome page, select the Skip this step next time check box to bypass this page the next
time you use the wizard. Click Next when you are ready to continue.