User Guide

Chapter 8 Editing
133
To apply a Bathroom Window effect:
1 On the Edit Panel, click Effects, and then double-click Bathroom Window.
2 In the Bathroom Window dialog box, in the Bar direction area, select one of the following to
specify the orientation of the bars in your image:
•Vertical
• Horizontal
3Drag the Bar width slider to set the thickness of the bars. Thinner bars result in a more distorted
image.
4 Do one of the following:
•Click Done to apply your changes and close the Bathroom Window tab.
•Click Cancel to discard all changes and close the tab.
Applying a Blinds effect
You can use the Blinds effect to divide your image into bars that look like venetian or vertical window
blinds. You can select or change the Blinds options to add blinds to your image, and save your options
as a preset for use at another time.
To apply a Blinds effect:
1 On the Edit Panel, click Effects, and then double-click Blinds.
2 On the Blinds tab, set the options as described below.
3 Do one of the following:
•Click Done to apply your changes and close the Blinds tab.
•Click Cancel to discard all changes and close the tab.
Blinds options
Blind width Specifies the width of the blinds. Type a number from 1 to 1000 or drag the
slider to adjust the width of each blind. As the value increases, the width of the
blind also increases.
Blind opacity Specifies the opacity of the blinds. Type a number from 1 to 99 or drag the
slider to adjust the opacity of the blinds. The higher the opacity, the more the
image is obscured.
Angle Specifies the angle of the blinds. Type a number from 1 to 360 or drag the
arrow to adjust the angle.
Blind color Specifies the color of the blinds.