User Guide

ACDSee™ Pro User Guide
92
To automatically correct an image's exposure:
1 In Edit Mode, on the Edit panel, click Exposure, and then select the Auto Exposure tab.
2 Select one of the following options:
• Auto Contrast and Color: adjusts color differences, brightness, and image color channels.
• Auto Contrast: adjusts the color differences and brightness only.
3 Use the slider to fine tune the amount of exposure you want to apply.
4 Do one of the following:
• Select another tab to use another tool.
•Click Done to apply your changes and close the Auto Exposure tool.
•Click Cancel to discard all changes and close the tool.
Adjusting image brightness
You can use the Brightness tool to adjust an image's brightness, contrast, and gamma. You can save
your options as a preset for future use.
To adjust an image's light levels:
1 In Edit Mode, on the Edit panel, click Exposure, and then select the Brightness tab.
2 On the Brightness tab, set the options as described below.
3 Do one of the following:
•Click Apply to apply your changes and set options on another tab.
•Click Done to apply your changes and close the Brightness tool.
•Click Cancel to discard all changes and close the tool.