User Guide

ACDSee Pro 3 User Guide
4. To tag images, do one of the following:
In the Comparison List, click the check box that is located at the bottom of the image on the right side.
In the Compare Images Viewer, right-click an image and click Tag or click the Tag icon in the image toolbar.
Click the Tag All button in the bottom left corner to tag all of the images, or click Untag All to untag all of the images.
5. To rate images, right-click an image, click Set Rating, and then select an appropriate rating.
6. To categorize images, right-click an image, click Set Categories, and then select an appropriate category (or create an
appropriate category).
7. Click OK.
Compare Images toolbar
Previous Swaps the selected image with the previous image in the Comparison List.
Next Swaps the selected image with the next image in the Comparison List.
Zoom In Increases the magnification of the selected image.
Zoom Out Reduces the magnification of the selected image.
Zoom menu Opens a menu of zoom options. Select from the following options:
Actual Size: Displays the image at its original size.
Fit Image: Displays the image at the largest magnification that fits in the Compare
Images Viewer.
Fit Width: Displays the image to fit between the left and right sides of the Compare
Images Viewer.
Fit Height: Displays the image to fit between the top and bottom of the Compare
Images Viewer.
Zoom Lock: Displays all images at the zoom option of the current image. If the zoom
is adjusted, the new zoom level is applied to all images that you view.
Zoom To: Opens a dialog box where you can select a zoom option.
Pan Lock Locks the panned image area, so that when you zoom and pan an image to a specific area,
the Compare Images Viewer displays the same area for all images you view.
Exposure warning Indicates pixels that may be over or underexposed.
Properties Displays properties for each image in the Compare Images Viewer. Click the Metadata
Setup button to specify which file properties are displayed.
The Compare Images tool displays the file properties in a field below each image.
Differences in properties are bolded, while similarities are displayed in regular font.
Histogram Displays a histogram for each image in the Compare Images Viewer.
Metadata Setup Opens a dialog box where you can select the metadata to display for each image in the
Compare Images Viewer.
One Image Displays one image in the Compare Images Viewer.
Two Images Displays two images in the Compare Images Viewer.
Three Images Displays three images in the Compare Images Viewer.
Four Images Displays four images in the Compare Images Viewer.
Properties Pane If one image is displayed, displays the Properties, Histogram, Magnifying Glass, and
Navigator panes.
Help Opens the Help file.
Image toolbars
Each image in the Compare Images tool has a toolbar located below it. You can use this toolbar to adjust each image individually.
40