User Guide

ACDSee Pro 3 User Guide
Sheet Metal options
Rounding Specifies the amount of curve in the edges of the impressions.
Detail Specifies the amount of detail in the impression.
Angle Specifies the angle of the grain in the sheet metal.
Metal color Specifies the color of the sheet metal.
Direction Specifies the direction in which the sheet metal was manipulated. Select one of the following:
Indented: Stamps the metal from the top side of the image.
Pushed out: Stamps the metal from underneath the image.
Applying a Shift effect
You can use the Shift effect to divide your images into bars and shift them in random directions. You can save your options as a
preset
for future use.
To apply a Shift effect:
1. In Process mode, click Edit.
2. In the Add group, click Special Effect, and then double-click Shift.
3. On the Shift tab, set the options as described below.
4. Do one of the following:
Click Done to accept your changes and close the Shift tab.
Click Cancel to discard your changes and close the tab.
Shift options
Strength Specifies the amount of shift between the bars.
Width Specifies the width of each bar.
Angle Specifies the angle of the bars.
Background color Specifies the background color of the filtered image. Select the Image check box to use the original
image colors, or click the color picker to select a different color.
Applying a Slant effect
You can use the Slant effect to make a photo appear slanted. For example, you could use the Slant effect to distort a photo by
pushing the top of the photo to the left and the bottom of the photo to the right. Similarly, you could use the slant effect to push the
left side of the photo upwards and the right side of the photo downwards. You can save your options as a preset
for future use.
To apply a Slant effect:
1. In Process mode, click Edit.
2. In the Add group, click Special Effect, and then double-click Slant.
3. On the Slant tab, set the options as described below.
4. Do one of the following:
Click Done to accept your changes and close the tab.
Click Cancel to discard your changes and close the tab.
174