User Guide

Chapter 5: Process mode
Groups in the tabs The presets you create in a group can contain various develop settings from the group.
A preset created in a group can only be accessed through the same group.
To create a preset from the top of the pane:
1. In Process mode, click Develop.
2. Make corrections to your image in Develop.
3. Click the develop settings button located at the top of the pane.
4. Select Save Preset from the menu.
5. In the Save Develop Settings Presets dialog, select the settings you want to save as a preset.
6. Enter a name for your preset.
7. Click OK.
To create a preset from a tab:
1. In Process mode, click Develop.
2. Select the Tune, Detail, or Geometry tab.
3. Make corrections to your image in the tab.
4. Click the develop settings button on the top right of the tab.
5. Select Save Preset from the menu.
6. In the Save Develop Settings Presets dialog, enter a name for your preset.
7. Click OK.
To create a preset from a group:
1. In Process mode, click Develop.
2. Select the Tune, Detail, or Geometry tab.
3. Select a group and make corrections to your image.
4. Click the develop settings button located on the top right of the group.
5. Select Save Preset from the menu.
6. In the Save Develop Settings Presets dialog, enter a name for your preset.
7. Click OK.
Applying a preset to a single image
To apply a preset to a single image in Develop
1. Click a develop setting button from the top of the pane, tab, or group.
2. From the menu, select a preset.
The image is updated with the selected preset.
You can also apply presets to an image in the filmstrip. Select an image in the filmstrip, right-click and select Apply Preset
. Then select the preset you want to apply to the image. The image is updated with the selected preset.
129