User Guide

Take Pictures options
Take picture Select one of the following two options to specify how
many pictures ACDSee should take:
•
Once: This option takes one picture.
• Every: This option takes pictures in specified inter-
vals. To specify an interval, type a value into the
spin box. Click the Unit drop-down arrow and
select Seconds, Minutes, or Hours.
Initial delay before Type a value or click the spin box arrows to determine how
taking first picture long ACDSee should wait to take the first picture.
Destination Select the Download and remove each picture
after it is taken check box if you want each image saved
on your hard disk drive and removed from the camera.
When this option is selected, do both of the following:
• Click the Browse button, select a folder on your
hard disk drive to save your images, and click OK.
• In the Filename template field, type a name for
your images. When ACDSee takes more than one
picture, a sequential number is added to the file
name. If you’d like to add an image-specific code
to the file name, click the Horizontal arrow
button and select Sequence Number, Date, or
Time.
133