User Manual

1English1
English -11
Model Number ANI309
Square Drive
3/8"
Max. Torque
130 ft-lbs (176 Nm)
Standard Bolt Size
3/8" (M10)
Free Speed
11000 RPM (/min)
Air Consumption
2.7 CFM (76.5 l/min)
Overall Length
6-5/16" (160.0 mm)
Air Inlet
1/4"
Air Pressure
90 PSI (6.2 Bar)
Air Hose
3/8" (10 mm)
Net Weight
2.0 lbs (0.93 kg)
Noise Level
Model Number
Sound Pressure
Level (L
P
A)
Sound Power
Level (L
W
A)
Vibration
Level
ANI404 97.66 dB(A) 108.66 dB(A) 15.98 m/sec
2
ANI405 97.66 dB(A) 108.66 dB(A) 15.98 m/sec
2
ANI406 97.66 dB(A) 108.66 dB(A) 15.98 m/sec
2
ANI308 96.7 dB(A) 107.7 dB(A) 8.99 m/sec
2
ANI309 96.7 dB(A) 107.7 dB(A) 8.99 m/sec
2
INSTALLATION AND LUBRICATION
1. Make sure the size of air supply lines conforms to tool’s maximum operating
pressure at tool inlet.
2. Dry the drain from valves at low points of piping, air filter and compressor tank
daily.
3. Make sure to only connect an air line made of components as shown in the
following diagram.
4. Before daily use, add a few drops of air tool oil in air inlet.
5. Make sure the connector couplings and
hose have sufficient air flow capacity.
6. Help prevent connector coupling blockage by lubricating daily.
7. Make sure the compressed air is clean and dry.