Operating Instructions

"SIMATIC Mobile Reader" app
5.4 Functions of the UHF app variant (RF660M)
Mobile reader SIMATIC RF360M/RF660M
54 Operating Instructions, 08/2022, C79000-G8976-C660-02
Table 5- 12 The menus of the "SIMATIC Mobile Reader" app
Menus
Functions
Scan
Starting/stopping scanning
Overview of the identified transponders
Display of the acquisition speed
Tag Editor
Starting/stopping scanning
Selecting the transponder to be edited
Reading and writing transponder data
Locking and unlocking memory areas
'Killing' transponders
Locate
Starting/stopping scanning
Overview of the identified transponders
Selecting the transponder to be located
Transponder localization based on the received signal strength
Settings
Specifying UHF settings
Exporting and resetting the logbook
Performing firmware update of the reader head module (Mcon)
Enabling/disabling acoustic signals/sounds
Resetting the app to factory settings
Reading out version information
Click the button of the desired menu to open it.
With the icon at the top left, you open a menu overview via which you can jump directly
to the relevant menus or back to the home screen.
Note
Terms within the app and documentation
Note that the term "Tag" is generally used in the "SIMATIC Mobile Reader" app, whereas the
term "Transponder" is used in this manual. These terms are synonyms and have the same
meaning.