User's Manual

10
will appear on the top of the screen.
You phone is now in Standby mode, ready for making and receiving calls.
1.3. Text Input Method
This phone provides various text input methods that allow you to use less key strokes to input and search for text:
y Abc/ABC/abc input method
y Numbers 123 input
y Insert symbol
2. Call Function
After the setup described in the previous sections is completed, you are ready to make and receive calls using the basic information provided in this section.
Note:
¾ When you are using headset, please plug/unplug the headset gently to avoid damaging the headset jack.
2.1. Phone power on/off
Power on
Press and hold Power Key to turn on the phone. If PIN code is required, please refer to the previous section in this guide.
Power off
In Standby mode, press Power Key to turn off the phone.
2.2. Dial
When the network carrier is shown on the screen, your phone has entered the Standby mode and you may make or receive calls. If you have installed two SIM cards, the two
network carriers will both appear on the screen.
2.2.1. Direct dial
Long Press any number key to enter the Dial screen. You can set Speed dial and make any number 2-9 shortcut for dialing the same.
Domestic call
Using the stylus, press the number keys and then press the Send key to make the phone call.
Note:
¾ In single card mode, will dial out to the one card.
¾ In dual card mode, will dial out with respect to card 1 and card 2.