User Guide

6
3.2 BLUFLAME OVERVIEW
The BluFlame features a compact and rugged fiber-reinforced plastic case. All
the ports used for measurements are located on the lower front side.
The BluFlame is controlled exclusively with its touch display.
1. Touch Display
2. Port P2 for Draft Measurements
3. Temperature Port T2 for Gas Temperature
4. Port P1 (For Differential Pressure Measurements Only)
5. Temperature Port T1 for Air Temperature
6. Gas Inlet Port
7. Gas Outlet
8. Mini USB Port for Data Transfer and Charging The Rechargeable Battery
9. Reset Button
10. Infrared Interface for Printouts
11. Micro SD Card Slot
3.3 CONDENSATE TRAP
Condensate that accumulates during the measurement will be collected in
the condensate trap.
The lower marking on the container wall indicates the maximum fill level up
to which condensate will be collected.
Empty this condensate container on a regular basis in order to prevent
condensate from being sucked into the BluFlame.
1. Upper Screwed Closure
2. Pocket Star Filter
3. Condensate Container with Marking for Max. Filling Capacity
4. Lower Screwed Closure
5. Gas From Flue Probe
The arrow symbolizes the gases’ direction of flow towards the BluFlame.
3.4 PROBES
A variety of flue probe models with non-detachable tubes and replaceable
tubes are available for the BluFlame. For a full list, please refer to the
company’s latest price list.
Following are 2 models provided as examples:
PROBE (A)
Featuring a 250 mm probe tube (non-detachable) and a 1.5 mm gas
sampling line
1. Stack Cone
2. Probe Tube
3. Condensate Trap Tube
4. Condensate Trap
5. Tube for Flue Gas Measurements
6. Tube for Draft Measurements
7. Stack Temperature Thermocouple