User Guide

11
5.6 FUEL SELECTION AND O
2
REFERENCE VALUE
Every time you open a measuring program for the flue gas measurement, you
can select a fuel from the . This list will show all available fuels.
• Select the following:
Gas measurements ➡ Gas measurement ➡ ➡ fuel type list
 ➡The fuel type list screen will appear.
• To add a fuel to the program list, enable the corresponding checkbox.
• Set the O
2
reference value as a %.
• Tap the Back button to exit the screen.
✔ You will be able to select the fuel from the measuring programs.
1. Enabling the Checkbox for a Specific Fuel
2. Setting the O
2
Reference Value (as a %)
5.7 CUSTOM FUELS
You can configure four fuels according to your specific
needs (the fuel parameters are configurable).
The last 4 fuels in the list will be the custom fuels that you
can configure as necessary. These custom fuels are identified
as “user fuel types” and shown in green.
5.8 CONFIGURING THE READING DISPLAY
The BluFlame will display a total of 20 readings distributed among 5 pages
with 4 readings each.
You can define which readings should be shown where on each reading screen.
• Select the following: Reading screen ➡ Define win.
 ➡The screen configuration mode will be displayed.
• You can use the arrow buttons to change the value that should be
displayed in each reading line.
• You can configure this for each measuring line on each page.
• Tap the Back button once you have made the changes you want.
✔ The reading display is now configured.
5.9 CONFIGURING BLUETOOTH PARAMETERS
You can use the following MRU software for this purpose:
MRU4u (Bluetooth), available at the Apple App Store and Google Play Store.
For iOS communications with a PC, tablet, or smartphone, low-energy
module #66173 is required as well.
SMARTdata (Bluetooth) (SMARTdata Version 1.2.0 or higher required)
MRU-Win (USB) (MRUwin Version 2.7.4.0 or higher required)
ONLINEview (USB/Bluetooth) (ONLINEview Version 2.9.5 or higher required)
The Bluetooth passkey is: 1234
Devices with firmware version 1.06.00 or higher with a dual Bluetooth
module:
➡ Menu: Extras ➡ Settings to select the Bluetooth mode.
• For Android devices, select the following mode: Bluetooth Classic BT-CL
• For Apple devices, select the following mode: Bluetooth Low Energy BT-LE
• If “DUAL” appears in the settings window instead of the selection ANDROID and
iOS, the Bluetooth module supports all applications without further settings.
Always set the BLUEGAZsmart setting to OFF.