Product Overview

BluVac+ LTE User’s Guide
4
Keypad
Quick Start
To operate the BluVac+ LTE as a basic vacuum gauge:
1. Install the battery as described in the “Battery Installation” section below.
2. Turn the power on by pressing . The display will show to indicate pressure greater
than 25,000 Microns.
3. Select the desired units by repeatedly pressing .
4. Attach the BluVac+ LTE to the system to be evacuated with a high quality vacuum hose. Start
the vacuum pump. Read the vacuum level from the Main Display.
5. Turn the power off by pressing and holding .
WARNING: To avoid damaging the BluVac+, only hand-tighten sensor connection. If greater torque
is required, support the sensor housing with a ¾” wrench.
NOTE: To assist in the use of this gauge and the interpretation of vacuum information, please refer to
the Frequently Asked Questions Section at the end of this guide.
Item Function
Press to Turn Power On.
Press and Hold to Turn Power Off.
While power is off, Press and Hold for Calibration Test
Press to Change Display Units.
Press and Hold to Change Leak Rate Display Units (/s or /min)
Press and Release to Activate/Deactivate Bluetooth Wireless Functionality
Press and Release to Activate Backlight
Press and Hold to Mute/Un-mute Sound