Product Overview

BluVac+ LTE User’s Guide
11
Troubleshooting
Under certain conditions, the display may read or . Please use the table below to
determine and fix the problem:
Display Mode Possible Problem Solution
Sensor Contaminated Clean the Vacuum Sensor
Normal
Operation
Ambient Temperature too
Low
Turn the BluVac+ off, warm
the vacuum port with your
hand, turn the BluVac+ back
on.
Calibration Sensor Contaminated
Clean the Vacuum Sensor
and Restart Calibration
Normal
Operation
Sensor Failure Contact Customer Service
Gauged Warmed too
Quickly
Restart Calibration. Allow the
Gauge to Warm Slowly
Calibration
Gauge Disturbed During
Calibration
Restart Calibration. Leave
the Gauge Undisturbed
During Warming Phase.