www.accutone.com Amplifier A30 SIGMA telephone amplifier user manual & installation guide Printed in Hong Kong AASA30 SigmaR2007AUG Accutone and the logo device are registered trademarks of Accutone Technologies Limited. © Copyright 2007 Accutone Technologies Limited, All rights reserved, Do not copy or re-distribute any contents.
Introduction. table of content. S This installation guide and user manual contains the following contents: PART A Getting Comfortable. professional call center amplifier for telephone headset. Thank you for purchasing the Accutone A30 Sigma Telephone Amplifier. This unit is designed to be paired with an Accutone telephone headset, which you can find more information from your distribution agent, or from our website.
understanding the controls. getting comfortable. A.1 Learning about the interface & controls. Part A. Getting Comfortable A.1 Understanding the Controls. A.2 Connection and Preparations. 1 2 3 5 6 7 8 9 10 11 12 13 14 15 MAIN SWITCHES AND INTERFACE 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
connection & preparations. connection & preparations. A.2 Hooking all the parts together! A.2 Hooking all the parts together! A.2.1 Connect to Telephone A.2.2 Connect to Telephone Headset Note that all connections jacks are located at the bottom of the unit. Flip over the amplifier, unplug the handset cord from your telephone base unit and insert it to the Modular Jack for Telephone Handset (12).
connection & preparations. connection & preparations. A.2 A.2 Hooking all the parts together! Hooking all the parts together! A.2.3 Inserting Batteries A.2.4 Headset Hanger Parts Turn the Battery Compartment Door (10) counter-clockwise to remove the entire battery housing. Insert a single “C” battery with the positive pole pointing up, and with the bottom part going in first.
begin to operate. connection & preparations. A.2 Hooking all the parts together! A.2.6 Hanger Installation Part 2 Upon completion of the hanger assembly, your headset hanger should look something like the illustration on the right. I Making sure the hanger faces the front, insert the entire unit into the Hanger Holder (8), and make sure the Extender (II) portion of the hanger reaches the end of the holder holes. Part B. Begin to Operate II B.1 Operating the Unit. HANGER faces front B.
operating the unit. operating the unit. How do I use this device? What can I do with it? B.1 B.1 B.1.1 Telephone Pairing 2 Different telephones have different configurations, so you need to first pair your amplifier with your telephone. The Telephone Configuration Switch (13) at the bottom of the unit allows user to effectively select a proper setting to pair with their telephone by sliding it to different positions, namely position (1-2-3). How do I use this device? What can I do with it? B.1.
operating the unit. operating the unit. How do I use this device? What can I do with it? B.1 B.1 How do I use this device? What can I do with it? B.1.4 Headset/Handset Application B.1.6 Voice Enhancement Function The Headset/Handset Application Switch (3) located on the top of the unit allows user to choose between using headset or the handset of the telephone base unit. When the button is pressed down, the handset is chosen, which means the default (released) status is for headset usage.
troubleshooting. troubleshooting. I can't make it work, what should I do? I hooked everything up exactly as suggested, but there is still no response from my A30 Sigma unit. My Caller cannot hear me at all or cannot hear me very well. I can't make it work, what should I do? B.2. Troubleshooting - Subsequent Problems B.2. Troubleshooting - First Time Installation problem B.2 B.2 items to check Check to make sure you have a standard C-battery # inserted in the amplifier, as power is required.
accessories & specifications. accessories & specifications. C.1 Any additional information I should know? C.1 Accessories The A30 Sigma kit includes: 1. One set of A30 Sigma Amplifier Unit. 2. Telephone Patch Cable with RJ-11 Modular Plugs. 3. Headset Hanger Parts (3 pieces). 4. Screwdriver Pinl. C.2 Specifications Part C. Accessories & Specifications C.1 Accessories. C.2 Specifications.
