User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-43
Figure 87: GUI “Update system code (firmware)”
2. Update System Code, Boot Code, BIOS/EFI individually from the download path. During the update
process, the RAID system will stop all data access.
Caution
Do NOT interrupt or stop updates that are in progress.
3. Once the updates are complete, make sure to power off the ExaSAN RAID system and host using the
proper power down sequence and then power on, again following the proper power on sequence.