User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-34
1. Select the array to migrate. From the drop down menu, select the RAID level to migrate to, and then
select the total number of drives to include in the array. A “+” appears above the drive(s) to be added,
and a “-” sign above the drive(s) to be removed.
2. Check the Confirm box and click Migrate.
Figure 77: GUI “Migration”
3. The main array information screen will indicate that the array is currently migrating.
Figure 78: GUI “Migration percentage”