User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-16
Figure 53: GUI “Controller info for four sections”
Array
The Array & Drives tab provides details on the status of the drives, such as which array they are assigned
to. It also has 2 radio buttons: Array and Drives.
The icons next to each drive will change depending on whether the Accusys PCIe controller is installed.
The number above the drive indicates the array number.
Figure 54: GUI “Array member”
Clicking the Array radio button displays information about the array: the array number, Status, RAID
type, stripe size, sector size, RAID Level, capacity, and slice.
The status of array actions, such as initialization, migration, and expansion, can be viewed under the
Array tab.