User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-14
arrays have been created, the Summary section indicates all arrays numbers
are in use and you will not be allowed to create more arrays.
Delete an Array
Deleting an array removes the selected array, and allows the drives to be used in another array, or
reconfigured for a new array. Follow the steps to delete an array.
1. Click on the drives containing the array to be deleted.
2. Check the Confirm box. Click Delete Array to complete the process.
Figure 51: GUI “Delete array”
Caution
When you delete an array, all data on the hard disk drives will be lost.