User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-7
Figure 39: GUI “Manual add RAID controller 2/2”
3. Click Search and wait for the Serial Number to populate.
4. Type the password (default is 00000000) for the controller.
5. Click Add to finish adding the controller.
Removing
To remove a controller, select a controller and then click the Remove Controller button to remove the
controller from the table. When the popup window appears, select Yes.