User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-6
Figure 37: GUI “RAID controller info”
Manual Add Controller
In the event that a firewall is used or special network settings are in place, RAIDGuard X client may not
be able to detect the Server in the Main Menu. In this case, you can manually add another controller in the
network.
1. Click on Controller on the menu bar and select Manual Add controller.
Figure 38: GUI “Manual add RAID controller 1/2”
2. Enter the Server or Switch IP.