User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
4. How to Use
User Guide Page 4-4
Manual Add Controller – Manually search and add the controller. Refer to Section 4.1.2.1 Adding
and Removing Controllers.
Update –
Update System Code – Click to update the firmware of the controller.
Update Boot Code – Click to update the boot code of the controller.
Update BIOS & EFI – Click to update the BIOS or EFI of the controller.
Dump controller log – Download the events log stored in the flash memory of the RAID controller.
Useful for sending to Accusys FAE support during troubleshooting.
Shutdown controller – When user clicks the option, RAID controller would write the data from
memory to HDDs forcibly.
Help –
About RAIDGuard X – Displays information about the RAIDGuard X version.
Help Center – Displays the help for RAIDGuard X.