User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
3. Installation
User Guide Page 3-16
3.3.5 Confirm the ExaSAN RAID system driver on OS
3.3.5.1 Confirming the ExaSAN RAID system driver on Mac
After installing the ExaSAN RAID system HBA driver on the Mac host server, confirm the driver has
been properly installed with the following steps.
1. Click on About This Mac.
Figure 28: to click about This MAC
2. Click on the More Info… button.
Figure 29: About This MAC
3. Click on the System Report… button.