User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
2. Preparation
User Guide Page 2-2
4. Make sure that the power outlets for all hardware components are grounded according to local and
national standards. Consult an electrician if you need assistance with grounding.
2.4 Operating Environment
The operating environment for the ExaSAN B08S2-PS must meet certain requirements:
1. Verify that the temperature range of the chosen location is within the limits established for the system
and all other components.
2. Make certain that the chosen location has adequate ventilation to maintain the necessary temperature
range.
3. If there are multiple hardware components installed at the chosen location, consider additional
cooling measures to assure efficient operation of the system and other components.
4. Environment parameters:
a. Operating temperature: 0°C to 40°C (32°F to 104°F)
b. Non-operating temperature: -40°C to 70°C (-40°F to 158°F)
c. Operating humidity: 5-85%, non-condensing
d. Storage humidity: 0-95%, non-condensing
2.5 Security
To ensure the security of the ExaSAN B08S2-PS, make certain that the chosen location meets your
security requirements.