User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
1. Introduction
User Guide Page 1-13
1.4.1.5 B08S2-PS Rear Panel
Figure 9: B08S2-PS back view
No. Name Description
1 Cooling fan
Maintains the disk array away from
overheating.
2 PCIe port
Connects the controller to the HBA on the
host server.
Host access LED (top):
• Flashing Blue indicates host accessing
is in progress.
• No light indicates no host accessing.
Host connected LED (bottom):
• Flashing Green indicates the controller
is connected normally.
• No light indicates the controller
connected abnormal.
3 Terminal port
Connects to diagnostic equipment. (For
engineering only)
4 Power button
Control the power to the RAID system
• Push the button to power on the
RAID system
• Push the button for 5 seconds to shut
down the power of the RAID system
manually.
5 Power Supply AC In
Connects to a power source with a power