User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
1. Introduction
User Guide Page 1-11
1.4.1.4 Disk Tray and LED Indicators
Figure 8: B08S2-PS tray front view
Disk Status LED #1 (Access LED) LED #2 (Power/Failure/Status LED)
Disk Online Steady Green
Disk Fail Steady Red
No Disk Steady Red
Disk Lock Steady Green
Disk Access Flashing Blue Steady Green
Disk
Initialization
Flashing Blue Steady Green
Disk Rebuild Flashing Blue
Rebuild Drives: Steady Red
Original Drives: Steady Green
Disk Expansion Flashing Blue
Extend Drives: Steady Red
Original Drives: Steady Green
Disk Migration Flashing Blue
Migrating Drives > Original Drives
• Migrating Drives: Steady Green
• Original Drives: Steady Green
Migrating Drives < Original Drives
• Migrating Drives: Steady Red
• Original Drives: Steady Green
Migrating Drives = Original Drives
• Migrating Drives: Steady Green
• Original Drives: Steady Green
Disk of Health
Flashing Blue Steady Green