User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
1. Introduction
User Guide Page 1-10
failed.
No Light indicates the LED failed or
power off
4 Heartbeat LED Blue
Indicates the controller status
• Flashing Blue indicates the
controller is active
• No light indicates the controller is
inactive.
1.4.1.2 Beeper Codes
Controller Status
Beeper mode
Turn on the Controller
Two short beeps
System Panic
Long beep
Controller Work Status, ex:
Disk init, disk rebuild, disk
expansion, disk migratrion, disk
snapshot, etc.
Regularly repeating one short beep
System Problem, ex:
Fan issue, Power issue, RAID error,
etc.
Regularly repeating one long beep and
two short beeps
Create array successfully
One short beep
Memory test error
Regularly repeating three rapid short
beeps
1.4.1.3 Disk Mapping
Disk 1
Disk 5
Disk 2
Disk 6
Disk 3
Disk 7
Disk 4
Disk 8