User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
1. Introduction
User Guide Page 1-6
• Certification: RoHS, UL, CE, FCC, C-Tick, BSMI
9. QSFP HBA
• 20Gb/s PCIe2.0 x4 HBA
• Short, low profile, form factor card
• Dimension 110 x 68.9 mm
• Standard bracket (Standard) & low profile bracket (included)
10. QSFP Cable
• Connector PCI Express 2.0 x4
• Copper cable lengths: 2M(standard)
• Optical cable lengths: 10M, 30M, 50M, 100M(all optical cables are optional)
1.2 Unpacking the System
Your ExaSAN B08S2-PS is shipped in special packaging (Figure 6) to provide protection during
transportation, as well as to facilitate simple and safe removal from the carton(s). Note that different
components may be shipped in separate cartons.