User Manual
Table Of Contents
- Notice
- About This Guide
- Guide to Conventions
- Trademarks
- Table of content
- Table of Figures
- 1. Introducing ExaSAN PCIe2.0 Storage Systems
- 2. Preparing to Install ExaSAN B08S2-PS
- 3. Installing the ExaSAN B08S2-PS
- 4. Using RAIDGuardX GUI
- 4.1 Accessing the RAIDGuardX GUI
- 4.1.1 RAIDGuard X Client and Server
- 4.1.2 RAIDGuard X Menu Bar
- 4.1.3 Updating the ExaSAN RAID system Firmware
- 4.1 Accessing the RAIDGuardX GUI
- 5. RAID Overview
- 6. Appendices
Appendices
User Guide Page 6-5
Appendix B: Icons
ICON
Description
Main Menu Icons
RAIDGuard X Server icon – The icon that is on the desktop and
notification area
Add / Delete a controller – Select the controller to administer
Create / Delete an array – Change the arrays within the RAID
system.
Preferences – Activate alarms, mode settings, cache settings,
password, and controller card time.
Email – Set the addresses to send e-mail alerts to.
Option – Set the Slice, expansion, migration, health, disk locking,
LUNs, and take a snapshot of the array.
Option Menu Icons
Slicing an array into several parts
LUN Map – Assign a LUN to a slice
Expand an array to larger capacity by adding disks
Migrate from one RAID level to another target RAID level
Snapshot – Create a backup of a slice
Health Center – Repair / Maintain arrays
Unlock – Fix locked drives
Application Icons
Drive icon
Drive belongs to Array 1, 2, 3, 4
A drive being deleted in Array 1, 2, 3, 4
A JBOD drive being selected
JBOD being deleted
A drive being selected
An offline drive
A locked drive