Manual
Quick Start Guide
P21
4. The Main screen lists the controller after it has been successfully added.
After the RAID controller is congured, an array can be created. This array tells the controller how many disks to
use and what their function should be.
Follow the steps below to create an array:
1. Select the RAID level from the drop down menu. Available levels are: 0, 1, 5, 6, 0+1 and JBOD.
Note
Each RAID level has a minimum disk requirement. This is shown in the information
to the right of the drop down list. For example, RAID 5 requires at least 3 drives.