Instructions / Assembly

Figure 1

1-1/2"

[38.1]

Min.

Drawer

Slide members and ball retainers: Cold rolled steel

Ball bearings: Carburized steel

NOTE: Specifications, materials, prices, terms, and delivery

are subject to change without notice.

NOTE: If cabinet is pre-drilled, the center line for the cabinet member

holes should be a minimum of 11/16" [17.5 mm] from the bottom

of the cabinet opening.

1. Install the slide outer member (larger member) to the cabinet

using #8 pan head screws. Make sure slides are parallel.

2. Mount shelf/drawer on the inner member tabs using #8 wood

screws. Do not tighten screws at this time. Cycle drawer at least

twice in both directions to allow drawer to self adjust. Tighten all

screws. There should be no sign of stiffness or binding.

NOTE: If drawer fronts are required, they must be notched to clear the

stationary member of the slide. See Figure 1.

Specifications

Slide Ordering Instructions

Packaging

Mounting Instructions

Complete your order for Accuride Model 2002 Two-Way Travel

drawer slide by specifying the following:

20 Pair C 2002 -12 D

Total Required Slides

Slide Finish

Slide Model

Slide Length

Polybag Packaging - Includes Screws

Distributor (D) Pack: All lengths packaged 10 pair per box.

Polybag includes one pair of slides packaged with screws.

Bulk (P) Pack: All lengths packaged 10 pair per box.

Slides and screws ordered separately but packed together.

ACCURIDE INTERNATIONAL INC.

12311 Shoemaker Avenue

Santa Fe Springs, CA 90670

TEL (562) 903-0200

FAX (562) 903-0208

www.accuride.com

Manufacturing, Engineering, and Sales

United States • Germany • Japan • Mexico • United Kingdom • China