User Manual RX series Weighing Indicators Applications: Electronic platform scale, weighing scale, etc.
1. Keypad Functions Off function. On function and function selection during normal operation and configuration. Zero display and set zero point or enter a tare value. A weight is tare and display net weight. 2. Display Status 〖AC〗 〖→T←〗 〖→0←〗 〖◣◢〗 ×10 lb 〖- 0〗 Mains power is applied to the indicator. A weight has been tarred and display the net weight. Zero display. Weight is stable. The display is temporarily set to high resolution. The unit of weighing is lb. 3.
Press the key. The unit will perform a zeroing operation and the weight to be calibrated will be displayed (default total capacity - e.g. 60.00) If you want to change the calibration value, press the will appear. Press until the digit to be modified flashes, then press it to the desired value (e.g. 10k = 0010.00) key and 0000.00 to modify Place the calibration weight on the scale. Once the weight has been deposited, press the key and the calibration will be performed and the actual weight will appear.
7. Tare and Remove Tare a) Tare: When Tare status LED is off and the weight is ≥0 and stable, press【→T←】 to acquire tare and switch to net mode, the tare status LED is turned on. b) Remove tare: When Tare status LED is on, press【→T←】 will switch to gross mode and removed tare. The tare status LED is off. 8. Battery Capacity When after turn on indicator, display〖bt 85〗is battery capacity. 9. Low Battery Warning When the battery is capacity less than 10% of full charge, display will flash.
4
05/07112021 Gram Precision S.L. Travesía Industrial, 11 · 08907 Hospitalet de Llobregat · Barcelona (Spain) Tel. +34 902 208 000 · +34 93 300 33 32 Fax +34 93 300 66 98 comercial@gram.es www.gram-group.
