Daim Ntawv Qhia Tus Neeg Siv

Quick Start Guide
XID Mixed Flow Filtration
Filtration Quick Start Guide
• Filter Sections are shipped separate from the fan
and are mounted in the eld
• This Quick Start Guide does not replace the
Installation Operation Manual (IOM), refer to the
IOM for more information
Parts and Tools List
Parts List
• (1) Fan
• (1) Filter section
• (1) Hardware kit
• (2) Isolator kit (optional)
Tool List
• Impact
• 1/2 inch socket
• Torque wrench
Step 1
Mount Filter Section to Fan
• Filter section and fan have “Airow” decals on
the exterior of the units, ensure the arrows are
aligned with the airow
• Mount the lter section to the inlet of the fan
using appropriate number of provided 5/16 inch
semi-gimlet fasteners provided in hardware kit
(no nuts required)
• Tighten to 132 in∙lbs (11 ft·lbs) as specied in
the IOM with 1/2 inch socket DO NOT
OVER-TIGHTEN
• Fan sizing and performance is designed for the
lter section to be mounted directly to the
INLET of the fan
Step 2
Install Filter and Fan Assembly in Ductwork
• Install assembly in proper orientation for
application (use appropriate isolators)
• Mount assembly to ductwork using fasteners
supplied by others
• Assembly can be mounted in horizontal or
vertical applications
• Flexible duct connectors are recommended for
mounting to the inlet of the lter section and
outlet of the fan
• Install assembly with approximately three wheel
diameters of straight duct before and after
the fan
Step 3
Filter Replacement and Cleaning
• Follow lter replacement and or cleaning
intervals recommended by lter supplier
FILTER SPACER(S)
FILTER(S)
1. Remove access door using 1/2 inch socket
• It is only necessary to remove one access
door to replace lters
2. Remove lter spacers and dirty lters
3. Install new lters in unit and replace lter spacers
• Ensure lters are installed in correct
orientation for proper airow (marked
on lters)
• Locate spacers towards the outside of the
unit to reduce any unnecessary blockage
in airow
4. Reinstall access door using 1/2 inch socket,
torque to 132 in∙lbs (11 ft·lbs) DO NOT
OVER-TIGHTEN
486124 • Square Duct Adapter and Filtration, Rev. 1, March 2023 • Copyright © 2023 Accurex, LLC
NOTE: Square Duct Adapter information on reverse side