User`s manual

ProScale M150, M250 with LCD Digital Displays Page 7 of 48
Product Specifications
Measuring Range*:
Model 150: 2 Standard Sizes:
0-250mm (10in) and 0-450mm (18in)
Model 250: 7 Standard Sizes:
0 to 300mm, 600mm, 1.3m, 2.4m, 3.0m, 3.6m, 6.0m
(0 to 12in, 24in, 52in, 96in, 120in, 144in, 240in)
Accuracy: + (.025 + .064 x L / 430) mm;
max error + 0.20mm @ 1.3 to 6m
+ (.001 + .0025 x L / 17) in;
max error + .008in @ 4 to 20 feet
(L = length of measurement in mm or inches)
Resolution Reduced: .1mm/.01cm/.01in;
Normal: .01mm/.001cm/.001in;
Increased: .01mm/.001cm/.0004in
Repeatability: .01mm or .001cm or .001in
Display Range: + 9999.99 mm; + 999.999 cm; + 999.999 in;
+ 399 63/64 in
Operating Temp: 0 to 50°C; 32 to 120°F
Temp Coef: 25ppm/°C; 13ppm/ °F
Max. Slew Rate: 400 mm/sec. (15 inches/sec.)
Accessories: See Section 6
Output Format: Mitutoyo Digimatic® SPC
ReadHead: 3m (10’), six-conductor cable terminated by RJ12
connector. (Maximum cable length 6m)
Dimensions: Available at www.proscale.com.
US Patents: 4420754, 4879508, 4878013, 4959615
Warranty: Three years from date of purchase.
All ProScale products are MADE IN USA
* MEASUREMENT range is approximately 100mm (4in) shorter than PHYSICAL
lengths.