User manual

ProScale RF Receiver User Manual Page 12 of 17
Command Format Examples
The following examples demonstrate how to configure various parameters of the
ProScale RF receiver system. <ENTER> is the enter key on the PC
System
To display the current system ID (from default), type in:
s<ENTER>
The receiver responds with:
System = 0
To change the system ID to 21, type:
S21<ENTER>
The receiver responds with:
System now = 21
Output Mode
To display the current output mode (from default), type in:
o<ENTER>
The receiver responds with:
Output Mode = 3
To change the output mode to 4, type:
O4<ENTER>
The receiver responds with:
Output Mode now = 4
Delimiter Character
To display the current delimiter character (from default), type in:
d<ENTER>
The receiver responds with:
Delimiter = <space>
To change the delimiter to a tab character, type:
O<TAB><ENTER> Where <TAB> = the PC tab key.
The receiver responds with:
Delimiter now = <tab>