Instruction manual

53
10mm
13mm
91mm
Panel Mount Display Part # 701-1550-002
¼ DIN Panel Mount
Display
(105 mm square)
SIZE:
Cutout dimensions
should measure at least
90mm x 90mm and no
larger than 93mm x 93mm.
The displays will fit panel
thickness between 3mm
and 19mm.
Display Options
Jumpers
ReadHead
Connector
Power
Connector
Jumper
Position
Function
Notes
JP1 A Increased resolution
(Decimal inch mode only)
Display format:
XX.XXXX in. (99 inch limit)
B Normal resolution Display format:
XXX.XXX in (394 inch limit)
XXXX.XX mm(9999 mm limit)
JP3 A Sets scaling direction Positive readings
B Sets scaling direction Negative readings
JP4 A Normal resolution Display format:
XXX.XXX in (394 inch limit)
XXXX.XX mm (9999 mm limit)
B Reduced resolution
(Decimal and mm modes)
Display format:
XXX.XX in (394 inch limit)
XXXX.X mm (9999 mm limit)
JP5 A Normal display Display format:
XXX.XXX in (394 inch limit)
XXXX.XX mm (9999 mm limit)
B Centimeters, decimal inches
and fractions
Display format:
XX.XXXX in (99 inch limit)
XXX.XXX cm (999 cm limit)
JP7 A Scales shorter than 400mm Default for Model 150-10
B Scales longer than 400mm Default for all other systems
JP2,
JP6,
JP8
Factory Settings
Do not change
positions