Instruction manual

49
Incremental Display Part #701-1495-002
Basic Display Part #701-1495-001
Standard Display Part # 701-1500-001
Jumper
Position
Function
Notes
JP1 A Increased resolution
(Decimal inch mode only)
Display format:
XX.XXXX in. (99 inch limit)
B Normal resolution Display format:
XXX.XXX in (394 inch limit)
XXXX.XX mm(9999 mm limit)
JP3 A Sets scaling direction Positive readings
B Sets scaling direction Negative readings
JP4 A Normal resolution
Display format:
XXX.XXX in (394 inch limit)
XXXX.XX mm (9999 mm limit)
B Reduced resolution
(Decimal and mm modes)
Display format:
XXX.XX in (394 inch limit)
XXXX.X mm (9999 mm limit)
JP5 A Normal display Display format:
XXX.XXX in (394 inch limit)
XXXX.XX mm (9999 mm limit)
B Centimeters, decimal inches
and fractions
Display format:
XX.XXXX in (99 inch limit)
XXX.XXX cm (999 cm limit)
JP7
A
Scales shorter than 400mm Default for Model 150-10
B Scales longer than 400mm Default for all other systems
JP2,
JP6,
JP8
Factory Settings
Do not change
positions
Display Options
Jumpers
ReadHead
Connector
701-1495-00x 701-1500-001
38mm
113mm
78mm
87mm