Instruction manual

24
ProKits
ProKits are easy to install. By following the basics of good installation,
reliable, error-free operation is assured. Because individual machines
may have different manufacturing dates and/or castings, some
installations may differ, and require hardware not provided by Accurate
Technology. In these cases, it's the responsibility of the installer to
choose the additional bolts, screws, or other mounting hardware that
guarantee proper installation and optimum operation.
Assembly:
Each ProKit shipped from Accurate Technology will have at least two
packages. The tubes contain the linear scales. The boxes contain the
hardware, brackets, digital components, and installation instructions.
Some parts may have been assembled prior to shipping.
Follow the installation instructions in the box to install the ProKit.
Use this manual as a reference for information concerning the
digital components and their use. Depending upon the installation, it
may be necessary to change the position of JP3 inside the digital display
to reverse the reading direction. (See section 4 regarding display jumper
settings.) After the ProKit's digital scale has been positioned, it is very
important to check that the scale is mounted in the exact direction of the
desired measurement, as measuring errors will result if the digital scale
is misaligned.